Switch panel |
To remove |
1. | Ignition switch in the OFF position. |
2. | Cars with navigation: Remove the radio unit using 84 71 203 Removal tool. Cars without navigation: Remove the plugs carefully to avoid damaging the unit. Remove the screws. Pull out the unit. |
3. | Unplug the connectors. |
4. | Cars with navigation: Remove the radio compartment.
|
5. | Remove the ACC panel. |
6. | Unplug the connectors. |
7. | Remove the upper and lower steering column cowls, 3 screws. |
8. | Remove the switches for the direction indicators and windscreen wipers. Let them hang loose. |
9. | Remove the cover to the fuse holder. |
10. | Remove the light control panel and unplug the connector. |
11. | Remove the other switches and their connectors. Note the position of the switches in the panel.
|
12. | Remove the switch panel. |
13. | Unplug the connector for the hazard flashers. |
14. | Lift away the switch panel. |
To fit |
1. | When replacing the panel: Transfer over air vents, cup holder and switch for hazard flashers to the new panel.
|
2. | Lift the switch panel into place. |
3. | Check that the air ducts are positioned correctly.
|
4. | Fit the switch panel. |
5. | Plug in the connector for the hazard flashers. |
6. | Connect and fit other switches. |
7. | Connect and fit the light control panel. |
8. | Fit the cover to the fuse holder. |
9. | Fit the switches for the direction indicators and windscreen wipers.
|
10. | Fit the upper and lower steering column covers. |
11. | Plug in the connectors to the ACC panel. |
12. | Fit the ACC panel. |
13. | Cars with navigation: Fit the radio compartment.
|
14. | Plug in the radio unit's connector. |
15. | Fit the radio unit. Cars without navigation: Fit the screws. Fit the plugs, make sure that the plugs are guided into the grooves. |