Parameter
|
System State
|
Expected Value
|
Description
|
Operating Conditions: Ignition ON
|
ABS Pump Motor Voltage
|
-
|
0 V
|
The scan tool displays the commanded pump motor voltage.
|
Acceleration Sensor Longitudinal Signal
|
-
|
Varies
|
The scan tool displays 0-5 V depending on the vehicle's longitudinal acceleration.
|
Antilock Braking System
|
-
|
OK
|
The scan tool displays OK or Malfunction. Malfunction is displayed if there is an ABS malfunction.
|
Brake Fluid Level Sensor
|
-
|
OK
|
The scan tool displays OK when the brake fluid is at correct level and Low when the brake fluid is low.
|
Brake Pedal Position Sensor
|
Brake pedal released
|
Inactive
|
The scan tool displays Inactive or Active depending on the state of the brake pedal.
|
Brake pedal applied
|
Active
|
Brake Pressure Sensor
|
Brake pedal released
|
0-1 V
|
The scan tool displays 0-5 V depending on the applied hydraulic brake pressure.
|
Brake pedal applied
|
1-5 V
|
Delivered Torque
|
-
|
varies
|
The scan tool displays 0-100% depending on the how much torque the engine is delivering.
|
Dynamic Rear Proportioning Status
|
-
|
OK
|
The scan tool displays OK or Malfunction. Malfunction is displayed if the EBCM disables the dynamic rear proportioning due to a fault.
|
Lateral Acceleration Signal
|
-
|
Varies
|
The scan tool displays 0-5 V depending on the vehicle's lateral acceleration.
|
Left Front Inlet Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the left front inlet solenoid valve is commanded ON.
|
Left Front Outlet Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the left front outlet solenoid valve is commanded ON.
|
Left Front Wheel Speed Sensor
|
-
|
0 km/h (0 MPH)
|
The scan tool displays km/h (MPH) depending on the current speed of the left front wheel speed sensor.
|
Left Rear Inlet Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the left rear inlet solenoid valve is commanded ON.
|
Left Rear Outlet Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the left rear outlet solenoid valve is commanded ON.
|
Left Rear Wheel Speed Sensor
|
-
|
0 km/h (0 MPH)
|
The scan tool displays km/h (MPH) depending on the current speed of the left rear wheel speed sensor.
|
Panic Brake Assist Status
|
-
|
OK
|
The scan tool displays OK or Malfunction. Malfunction is displayed if the EBCM disables the panic brake assist due to a fault.
|
Pump Motor Relay Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the pump motor is commanded ON.
|
Primary Isolation Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the isolation solenoid valve is commanded ON.
|
Primary Prime Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the prime solenoid valve is commanded ON.
|
Requested Torque
|
-
|
varies
|
The scan tool displays 0-100% depending on the how much torque is requested.
|
Right Front Inlet Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the right front inlet solenoid valve is commanded ON.
|
Right Front Outlet Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the right front outlet solenoid valve is commanded ON.
|
Right Front Wheel Speed Sensor
|
-
|
0 km/h (0 MPH)
|
The scan tool displays km/h (MPH) depending on the current speed of the right front wheel speed sensor.
|
Right Rear Inlet Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the right rear inlet solenoid valve is commanded ON.
|
Right Rear Outlet Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the right rear outlet solenoid valve is commanded ON.
|
Right Rear Wheel Speed Sensor
|
-
|
0 km/h (0 MPH)
|
The scan tool displays km/h (MPH) depending on the current speed of the right rear wheel speed sensor.
|
Secondary Isolation Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the isolation solenoid valve is commanded ON.
|
Secondary Prime Solenoid Valve Feedback
|
-
|
Inactive
|
The scan tool displays Inactive or Active. Active is displayed when the prime solenoid valve is commanded ON.
|
Steering Column Position
|
Steering wheel in straight position
|
-5 to +5°
|
The scan tool displays °. This is the current position of the steering angle sensor.
|
Steering wheel turned left until stop
|
450-550°
|
Steering wheel turned right until stop
|
-550 to -450°
|
System Voltage
|
-
|
11-14 V
|
The scan tool displays V. This is the current battery voltage.
|
Traction Control Switch
|
Traction control switch released
|
Inactive
|
The scan tool displays Inactive or Active depending on the traction control switch status.
|
Traction control switch pressed
|
Active
|
Traction Control System
|
-
|
OK
|
The scan tool displays OK or Malfunction. Malfunction is displayed if there is a traction control malfunction.
|
Vehicle Stability System
|
-
|
OK
|
The scan tool displays OK or Malfunction. Malfunction is displayed if there is a stability control malfunction.
|
Vehicle Stability System Relay Feedback
|
-
|
Active
|
The scan tool displays Inactive or Active. Inactive is displayed when stability control is disabled.
|
Vehicle Stability Enhancement System Switch
|
Traction control switch released
|
Inactive
|
The scan tool displays Inactive or Active depending on the traction control switch status.
|
Traction control switch pressed
|
Active
|
Yaw Rate Signal
|
-
|
Varies
|
The scan tool displays 0-5 V depending on the vehicle's yaw rate.
|