Trailer Lamp Control Module Scan Tool Information |
Parameter | System State | Expected Value | Description |
Operating Conditions: Ignition ON |
|||
Battery Voltage |
- |
Varies 12-14 V |
The scan tool displays volts. This is the voltage of the trailer lighting converter. |
Brake Pedal Switch Status |
- |
Inactive |
The scan tool displays Active when the brake pedal is pressed. The scan tool displays Inactive when the brake pedal is released. |
Key in Ignition Status |
- |
Active |
The scan tool displays Active when the Ignition is ON. |
Trailer Connection Detected |
- |
No |
The scan tool displays Yes if a trailer is connected to the vehicle. |
Output Control | Description |
Left Trailer Tail Lamp |
Commands the left trailer tail lamp ON and OFF |
Left Trailer Turn Signal Lamp |
Commands the left trailer turn signal lamp ON and OFF |
Left Auxiliary Tail and Brake Lamp |
Commands the left auxiliary tail and brake lamp ON and OFF |
Left Rear Auxiliary Turn Signal Lamp |
Commands the left rear auxiliary turn signal lamp ON and OFF |
Left Tail Lamp |
Commands the left tail lamp ON and OFF |
Right Trailer Tail Lamp |
Commands the right trailer tail lamp ON and OFF |
Right Trailer Turn Signal Lamp |
Commands the right trailer turn signal lamp ON and OFF |
Right Auxiliary Tail and Brake Lamp |
Commands the right auxiliary tail and brake lamp ON and OFF |
Right Rear Auxiliary Turn Signal Lamp |
Commands the right rear auxiliary turn signal lamp ON and OFF |
Right Tail Lamp |
Commands the right tail lamp ON and OFF |
Trailer Brake Lamps |
Commands the trailer brake lamps ON and OFF |
Trailer Backup Lamps |
Commands the trailer backup lamps ON and OFF |
Trailer Fog Lamp(s) |
Commands the trailer fog lamp(s) ON and OFF |