Radio Replacement

 

Callout Component Name

Preliminary Procedure

1. Disconnect the battery negative cable. Refer to Battery Negative Cable Disconnection and Connection.
2. Remove the Instrument panel upper trim panel. Refer to Instrument Panel Upper Trim Panel Replacement.
3. Remove the driver information display UDT, if installed. See Driver Information Display Replacement (UAG/UFD) Driver Information Display, Replacement (UDT)


1

 Radio Fastener (Qty: 4 )

See Fastener Caution.

Tighten

2.5 Nm (22 lb in)
2

 Radio


Procedure

1. Disconnect the electrical connectors.
2. After repairs, refer to Control Module References for programming and set up information.