DTC P160A |
Diagnostic Instructions |
• |
Perform the Diagnostic System Check - Vehicle prior to using this diagnostic procedure. |
• |
Review Strategy Based Diagnosis for an overview of the diagnostic approach. |
• |
Diagnostic Procedure Instructions provides an overview of each diagnostic category. |
DTC Descriptor |
Circuit/System Description |
Conditions for Running the DTC |
• |
The ignition is ON. |
• |
The DTC runs continuously once the above condition is met. |
Conditions for Setting the DTC |
Action Taken When the DTC Sets |
Conditions for Clearing the DTC |
Reference Information |
Circuit/System Testing |
• |
Ensure that all tool connections are secure. |
• |
Ensure that the programming equipment is operating correctly. |
• |
Ensure the correct software and the correct calibrations are being used. |
• |
Attempt to program the K20 Engine Control Module. |
• |
If DTC P160A sets, replace the K20 Engine Control Module. |
Repair Instructions |