Special Tools
EL 39200Digital Multimeter (DMM)For equivalent regional tools, refer to Special Tools.
Refer to Test Probe Caution
The following procedure determines the difference in voltage potential between 2 points.
| 1. |
Set the Digital Multimeter (DMM) to the V (DC) position. | |
| 2. |
Connect the positive lead of the DMM to the point of the circuit to be tested. | |
| 3. |
Connect the negative lead of the DMM to the other point of the circuit. | |
| 4. |
Operate the circuit. | |
| 5. |
The DMM displays the difference in voltage between the 2 points. | |