GMLAN Wiring Repairs |
• |
EL-38125-10Splice Sleeve Crimping Tool
|
• |
J 38125-5Ultra Torch Special Tool
|
• |
DuraSeal splice sleeves |
• |
A wire stripping tool |
• |
A special heat shrink sleeve environmentally seals the splice. The heat shrink sleeve contains a sealing adhesive inside. |
• |
A cross hatched (knurled) core crimp provides necessary contact integrity for the sensitive, low energy circuits. |
GMLAN Repairs |
Note | ||
When making a repair to any GMLAN network, the original wire length after the repair must be the same length as before the repair. If the network is a twisted pair, the twist must be maintained after the repair is completed. |
GMLAN Connector Terminal Repair |
Note | ||
A terminated lead can be used to replace damaged connector terminals for both high speed and low speed GMLAN systems. When making a connector terminal repair on a GMLAN high speed system with twisted pair wires, do not untwist the wires more than necessary to make the repair. |
GMLAN Wire Repair |
Note | ||
Refer to Wiring Repairs in the service information connector end views or the vehicle schematics in order to determine the correct wire size for the circuit you are repairing. You must obtain this information in order to ensure circuit integrity. |