High Temperature Wiring Repairs |
Note | ||
All wiring repairs need to be 200 mm from the heat zone. Areas of consideration would be any area located near the exhaust manifolds, catalytic converter, exhaust pipes, and turbocharged engines. |
• |
DuraSeal splice sleeves to crimp and seal connections |
• |
High temperature SCT1 shrink tubing to protect the splice sleeves |
• |
Terminated leads or pigtails |
• |
The correct tools to remove the terminals from the connectors |
High Temperature Wiring |
• |
Use high temperature bulk wire rated at 150°C (302°F) continuous temperature to replace any damaged wire. |
• |
Replace any heat shielding that is removed. |
• |
Cover any DuraSeal splice sleeves with SCT1 shrink tube. |
• |
After making a wiring repair, ensure that the location of the wiring is not moved closer to the heat source. |
Identifying High Temperature Wiring |
Note | ||
High temperature areas would be areas located near exhaust manifolds, catalytic converters, exhaust pipes, and turbocharged engines. |