Tire Pressure Indicator Receiver Replacement

 

Callout Component Name

Preliminary Procedure

Remove the 2 center clips on the lower part of the rear bumper. Refer to Rear Bumper Fascia Replacement.
1

 Tire Pressure Indicator Receiver Fastener (Qty: 2)

Refer to Fastener Caution.

Tighten

4 Nm (35 lb in)
2

 Tire Pressure Indicator Receiver


Procedure

1. Disconnect any electrical connectors as needed.
2. After repairs, program the tire pressure monitoring system. Refer to Control Module References.