REMOVAL

REMOVAL

Warning

The radiator is pressurized. Wait until the engine cools down before working on the radiator.

Set the vehicle on a lift.

Disconnect the ground cable from battery.

Lift-up the vehicle.

Remove the under cover.

Drain the engine coolant completely.

Disconnect the connectors of radiator main fan motor (A) and sub fan motor (B).

Disconnect the ATF cooler hose from ATF pipe. (AT model) Plug the openings in the hose and radiator with caps in order to prevent ATF from leaking.

Disconnect the radiator outlet hose from thermostat cover.

Lower the vehicle.

Remove the air intake duct.

Remove the V-belt covers.

Disconnect the overflow hose.

Remove the reservoir tank.

Disconnect the radiator inlet hose (A) and water tank hose (B) from radiator.

Remove the radiator upper brackets.

While lifting the radiator up, slide it to the left.

Lift-up the radiator, and then remove it from vehicle.