SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Install the water pump onto cylinder block (LH).

Note
• Replace the gasket with a new one.

• When installing the water pump, tighten the bolts in two stages in alphabetical sequence as shown in the figure.


Tightening torque:

First:

12 Nm (1.2 kgf-m, 8.7 ft-lb)

Second:

14 Nm (1.4 kgf-m, 10.2 ft-lb)


Connect the hose to water pump.

Install the tensioner bracket.

Tightening torque:

24.5 Nm (2.5 kgf-m, 18.1 ft-lb)


Install the belt cover No. 2 (LH).

Tightening torque:

5 Nm (0.5 kgf-m, 3.6 ft-lb)


Install the cam sprockets (LH) by using ST.

ST 32005019 CAM SPROCKET WRENCH

Tightening torque:

78 Nm (8.0 kgf-m, 57.9 ft-lb)


Install the belt idler No. 2.

Tightening torque:

39 Nm (4.0 kgf-m, 28.9 ft-lb)


Install the automatic belt tension adjuster whose tension rod is held with pin.

Install the timing belt.

Install the V-belts.

Install the radiator.