REMOVAL

/ 9-2X (9346) / 2005 / 2. Engine / EMISSION CONTROL (AUX. EMISSION CONTROL DEVICES), 2.0T / PCV Hose Assembly / Adjustment/Replacement / REMOVAL

Important

Removal is not allowed except for the damage of PCV hose, diagnosis connector and PCV valve.

Remove the intake manifold.



Clip the protrusion of clamp after aligning the concave portion of ST with protrusion of clamp, and then unlock the lock.

Remove the PCV hose assembly.

ST 18353AA000 CLAMP PLIERS

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.