INSTALLATION
| INSTALLATION |
| Note | ||
|
Replace the gaskets with new ones. |
Assemble the front exhaust pipe and exhaust manifolds.
Tightening torque:
35 Nm (3.6 kgf-m, 26.0 ft-lb)
Tightening torque:
25 Nm (2.5 kgf-m, 18.1 ft-lb)
Install the upper exhaust manifold cover (RH).
Tightening torque:
19 Nm (1.9 kgf-m, 13.7 ft-lb)
Install the front exhaust pipe assembly.
Tightening torque:
35 Nm (3.6 kgf-m, 26.0 ft-lb)
Connect the exhaust manifold (RH) to turbocharger joint pipe.
Tightening torque:
35 Nm (3.6 kgf-m, 26.0 ft-lb)
Install the upper and lower exhaust manifold covers (LH).
Tightening torque:
19 Nm (1.9 kgf-m, 13.7 ft-lb)
Install the lower exhaust manifold cover (RH).
Tightening torque:
19 Nm (1.9 kgf-m, 13.7 ft-lb)
Install the front oxygen (A/F) sensor.
Install the under cover.
Connect the battery ground cable to battery.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
