SAAB WIS ONLINE

REMOVAL

REMOVAL

Release the fuel pressure.

Open the fuel filler flap lid, and remove the fuel filler cap.

Disconnect the ground cable from battery.


Remove the air intake duct, air cleaner case and air intake chamber.

Remove the generator.

Remove the power steering pump and reservoir tank from bracket.

Remove the bolts which hold power steering pipes onto the protector.

Note

Do not disconnect the power steering hose.



Remove the bolts which install power steering pump bracket.


Disconnect the power steering pump switch connector (A).


Remove the reservoir tank from the bracket by pulling it upwards.


Place the power steering pump on the right side wheel apron.


Disconnect the spark plug cords from spark plugs by pulling the plug cap. (Do not pull the cord.)

Disconnect the engine coolant hoses (A) from throttle body.


Disconnect the brake booster hose (A).


Disconnect the PCV hose (A) from intake manifold.

Disconnect the engine harness connectors (B) from bulkhead harness connectors.


Disconnect the connectors from engine coolant temperature sensor.


Disconnect the knock sensor connector.


Disconnect the connector from crankshaft position sensor.


Disconnect the connector from oil pressure switch (A).


Disconnect the connector from camshaft position sensor.


Remove the EGR pipe from intake manifold.


Disconnect the fuel hoses from fuel pipes.

Separate the quick connectors of fuel delivery line and return line by pushing the ST to the direction of arrow.

ST 32005086 CONNECTOR REMOVER

Remove the clip, and separate the evaporation hose from pipe.

Warning
• Be careful not to spill fuel.

• Catch the fuel from hoses using a container or cloth.



(A)

Fuel delivery hose

(B)

Return hose

(C)

Evaporation hose



Remove the bolts which secure intake manifold to cylinder head.


Remove the intake manifold.