SAAB WIS ONLINE

DISASSEMBLY

DISASSEMBLY

HIGH CLUTCH, REVERSE CLUTCH

Remove the snap ring, and take out the retaining plate, drive plates, driven plates.


(A)

Snap ring



Remove snap ring, and take out the retaining plate, drive plates and driven plates.


(A)

Snap ring



Using ST1 and ST2, remove snap ring.

ST1 32005075 COMPRESSOR

ST2 32005112 SEAT


(A)

Snap ring



Take out clutch cover, spring retainer, high clutch piston and reverse clutch piston.


(A)

Reverse clutch piston

(B)

Cover

(C)

Return spring



Remove seal rings and lip seal from high clutch piston and reverse clutch piston.


(A)

High clutch piston

(B)

Reverse clutch piston



PLANETARY GEAR, LOW CLUTCH

Remove snap ring from the low clutch drum.


(A)

Snap ring

(B)

Low clutch drum



Take out front planetary carrier.


(A)

Front planetary carrier

(B)

Low clutch drum



Take out rear sun gear.


(A)

Rear sun gear

(B)

Rear planetary carrier



Take out rear planetary carrier, washer and thrust needle bearing.


(A)

Rear planetary carrier

(B)

Low clutch drum



Take out rear internal gear.


(A)

Rear internal gear

(B)

Low clutch drum



Remove the snap ring from the low clutch drum.


(A)

Snap ring

(B)

Low clutch drum



Compress the spring retainer, and remove the snap ring from the low clutch drum, by using ST1 and ST2.

ST1 32005112 SEAT

ST2 32005075 COMPRESSOR


(A)

Snap ring

(B)

Low clutch drum



Remove one-way clutch.

Install the one-way clutch inner race to the low clutch drum, and apply compressed air to remove the low clutch piston.


(A)

Apply compressed air

(B)

One-way clutch inner race



Remove the one-way clutch inner race.

Remove the one-way clutch after taking out the snap ring.


(A)

Snap ring

(B)

Plate

(C)

One-way clutch



Remove the needle bearing after taking out the snap ring.


(A)

Needle bearing

(B)

Snap ring



2-4 BRAKE

Separate 2-4 brake piston and piston retainer.


(A)

2-4 brake piston

(B)

2-4 brake piston retainer



Remove the D-ring from 2-4 brake piston.

ONE-WAY CLUTCH INNER RACE

Remove seal rings.


(A)

One way clutch inner race

(B)

Seal rings



Using ST, remove needle bearing.

ST 32005071 PULLER ASSY

ONE-WAY CLUTCH OUTER RACE

Remove the one-way clutch after taking out the snap ring.


(A)

Snap ring

(B)

Plate

(C)

One-way clutch



Remove the needle bearing after taking out the snap ring.


(A)

Needle bearing

(B)

Snap ring