REMOVAL
| REMOVAL |
Set up the vehicle on a lift.
Move the select lever to “N” range.
Remove the air intake chamber. (Saab 9-2X 2.5i Linear)
Remove the intercooler. (Saab 9-2X 2.0T Aero)
Disconnect the inhibitor switch connector.
|
(A)
|
Inhibitor
switch
|
Remove the inhibitor switch connector from stay.
Lift-up the vehicle.
Remove the front and center exhaust pipes.
Remove the snap pin and washer from range select lever.
|
(A)
|
Range select
lever
|
|
(B)
|
Snap pin
|
|
(C)
|
Select
cable
|
|
(D)
|
Washer
|
Remove the plate assembly from transmission case.
|
(A)
|
Select
cable
|
|
(B)
|
Plate ASSY
|
Remove the bolts.
|
(A)
|
Inhibitor
switch
|
Move the range select lever to parking position (left side).
|
(A)
|
Range select
lever
|
Remove the inhibitor switch from transmission.
|
(A)
|
Inhibitor
switch
|
Disconnect the inhibitor switch harness connector from inhibitor switch.
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
