SAAB WIS ONLINE

INSTALLATION

INSTALLATION

Install detention spring to transmission case.

Tightening torque:

6 Nm (0.6 kgf-m, 4.3 ft-lb)


Insert range select lever, and tighten bolt.

Tightening torque:

6 Nm (0.6 kgf-m, 4.3 ft-lb)


Install the manual plate and parking rod.


(A)

Bolt

(B)

Range select lever

(C)

Manual plate

(D)

Parking rod



Insert spring pin to manual plate.


Install control valve assembly and oil pan.

Turn over the transmission case to its original position.

Install pitching stopper bracket.

Tightening torque:

41 Nm (4.2 kgf-m, 30.4 ft-lb)

Install inhibitor switch and adjust the inhibitor switch.

Insert inhibitor switch and transmission connector into stay.


(A)

Transmission harness

(B)

Inhibitor switch harness



Install air breather hose.

Insert the input shaft while turning lightly by hand and verify the protrusion amount.

Normal protrusion A:

50 — 55 mm (1.97 — 2.17 in)


Install the torque converter clutch assembly.

Install the transmission assembly to the vehicle.