INSTALLATION

INSTALLATION

Install in the reverse order of removal. Observe the following instructions.

•

Installation of DOJ to differential:

Important
•	Replace the self-locking nut and DOJ snap ring with new ones.
•	Always use the special tool not to allow the DOJ splines to damage the side oil seal. ST 32005037 OIL SEAL PROTECTOR
•	Always tighten the bushing location when tires are in full contact with the ground and vehicle is curb weight.
•	Secure the bolt head and tighten the nut when installing the adjusting bolt.

Note
Check the wheel alignment and adjust if necessary.