Engine oil and oil filter
Engine oil and oil filter |
Check for oil leakage |
Check that no oil leakage occurs at the top or bottom of the engine and gearbox or in the power steering's hydraulic system.
Engine oil |
Change oil. Fill with oil to the MAX mark on the dipstick. The distance between the MAX and MIN marks corresponds to 1 litre (1.05 qts).
Check the level while the engine is still warm, 2-5 minutes after switching it off.
Oil capacity
B204, B234, B235: 4.0 litres (4.2 qts), including filterOil type:
See LubricantsTightening torque:
Drain plug
B204, B234, B235: 25 Nm (18.5 lbf ft)
|
Oil filter change |
• |
Loosen the oil filter with the filter wrench and unscrew it. Clean the sealing surface on the engine.
|
• |
Oil in the new oil filter's rubber gasket and fit it in place. Tighten the filter by hand.
|
• |
Start the engine and check the filter for leaks.
|