Check oil level, leaks, top up as necessary
|
|
Check oil level, leaks, top up as necessary
|
Check the level while the engine is still warm, 2-5 minutes after switching it off.
Top up with oil to the MAX mark on the dipstick. The distance between the MAX and MIN marks corresponds to 1 litre (1.05 qts).
Oil type
See
Lubricants
Warning
|
|
Make sure the filler cap is screwed on properly after topping up with oil. Oil on the exhaust manifold can cause fires.
|
|
|
|
|
|
|
Fluid level, automatic transmission
|
Apply the handbrake. Start the engine and run it at idling speed. Select D and wait at least 15 seconds. Then select R and wait another 15 seconds. Repeat in position P.
Check the oil level (engine running at idling speed and selector lever in P). Top up as necessary.
|
Important
|
|
The dipstick has two sets of level marks. The amount of oil between the maximum and minimum marks is about 0.4 litres (0.4 qts).
|
|
|
Oil type:
See Lubricants
|
Fluid level, power steering
|
Check the level and top up as necessary. If the fluid level is low, investigate the cause.
Oil type:
See
Lubricants
|
Warning
|
|
Oil spilled on hot parts could cause a fire.
|
|
|
|
|
|
