Glow plug, auxiliary heater
Glow plug, auxiliary heater |
1. |
Remove the heater, see
alternatively
.
|
2. |
Remove the cover over the blower fan.
|
3. |
Loosen the four bolts on the control module, remove the cover with the air intake and carefully bend out the control module.
|
4. |
Remove the connector and remove the control module from the heater.
|
5. |
Loosen the nut and cable connections from the glow plug.
|
6. |
Move aside the cables.
|
7. |
Remove the glow plug.
|
To fit |
1. |
Fit the glow plug.
|
2. |
Connect cabling to the glow plug and tighten the nut.
|
3. |
Fit connector B2 to the control module.
|
4. |
Fit the cover with air intake and control module.
|
5. |
Fit the cover.
|
6. |
Fit the heater, see
alternatively
.
|