Oil pressure measurement B235R, B205L/R
|
Oil pressure measurement B235R, B205L/R
|
1.
|
Raise the car and place a suitable receptacle for oil under the engine.
|
2.
|
Remove the lower banjo bolt by the oil filter intermediate piece from the oil pipe to the turbocharger and allow the engine oil to drain.
|
5.
|
Position the pressure gauge so that it can be read from inside the car.
Important
|
Make sure the pressure gauge hose is not resting against any warm or sharp parts.
|
|
|
6.
|
Start the engine and read off the oil pressure. See
Oil pressure
.
|
7.
|
Leave the engine idling to reduce the turbo speed.
|
8.
|
Turn off the engine and raise the car.
|
9.
|
Remove the pressure gauge equipment.
|
10.
|
Fit the oil pipe banjo bolt using a new sealing washer. Wipe up any spilt oil.
|
11.
|
Lower the car. Check the oil level and top up as necessary.
|