Checking boost pressure (on the road)
| Checking boost pressure (on the road) |
| Important | ||
|
The engine should be thoroughly warmed up. |
||
| 1. |
Connect the diagnostics tool.
|
|
| 2. |
Select EDC, Read Values, Charge Air Absolute Pressure.
|
|
| 3. |
Carry out wide open throttle acceleration in 3rd gear at an engine speed below 1500 rpm. When engine speed reaches about 2700 rpm and boost pressure is stabilized, note the reading on the diagnostics instrument. It should be between 19 kPa and 21 kPa.
|
|
| 4. |
Remove the diagnostic tool and adjust the wastegate pushrod. See
Basic setting of the pressure regulator, turbo
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
