Front doors

Front doors

To remove

Unplug the wiring harness connector in the door (bayonet fitting).

Remove the door stop from the A-pillar.

Remove the hinge bolts.

Important
Carefully lift the door off its hinges.

To fit

Fit in reverse order.

Tightening torque:

Hinge bolts: 47 Nm (35 lbf ft).

Note
On order to get the correct fit between the door and wing, it may be necessary to lift slightly at the rear edge of the door. This applies especially to the 3-D model.

Connect the diagnostics tool and erase any diagnostic trouble code.

Adjustment

Adjust the door, see Adjustment of front and rear doors