Strap guide cover, CV
| Strap guide cover, CV |
| 1. |
Remove the rear side trim. See
Removing
.
|
|
| 2. |
Remove the bolt that secures the strap guide cover.
|
|
| 3. |
Remove the clips securing the strap guide cover and remove it from the trim.
|
|
| 4. |
Remove the interior lighting from the strap guide cover.
|
|
| To fit |
| 1. |
Fit the interior lighting in the strap guide cover.
|
|
| 2. |
Fit the strap guide cover on the trim and fasten the clips.
|
|
| 3. |
Tighten the bolt.
|
|
| 4. |
Refit the side trim. See
Fitting
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
