Seat frame
Seat frame |
To remove |
2. |
Remove the height adjustment handle, the knob for backrest rake adjustment and the seat side panel. See
|
3. |
Remove the plastic cover on each side of the backrest joint.
The plastic covers conceal the holes for access to the screws holding the seat at the rear. |
4. |
Undo the seat cushion at the rear, 2 screws.
The screws are inside the hole concealed by the plastic cover, now removed. |
5. |
Undo the seat cushion at the front, 2 screws.
|
6. |
Undo the straps holding the backrest upholstery at the bottom.
|
7. |
Cut the cable ties. Unplug and mark the connector.
Lift out the seat. |
8. |
Front seat, easy entry:
Unhook the easy-entry cable.
|
9. |
Remove the backrest, 2 screws each side.
|
10. |
Remove the seat-belt buckle, 1 screw and cable tie.
|
11. |
Electrically adjustable front seat; Remove legroom adjustment motors and sensors, see
.
Remove motor and sensor for height adjustment front, see , and rear, see . |
To fit |
Fit in reverse order.
Important | ||
Electrically adjustable seat: Fit the protection on the front bolt. |
||