Hydraulic body, front, replacement
Hydraulic body, front, replacement |
1. |
Raise the car and remove the wheel.
|
2. |
Use a pair of pliers to press the piston back and remove the clip.
|
3. |
Depress the brake pedal slightly, using a brake pedal clamp.
|
4. |
Remove fuse No. 12 for the brake lights.
|
5. |
Detach the hose from the hydraulic body.
|
6. |
Remove the protective caps and the hydraulic body's two guide pins.
|
To fit |
1. |
Fit the hydraulic body with clamp and tighten its two guide pins, using a torque wrench.
Tightening torque 28 Nm (21 lbf ft) |
2. |
Attach the hose to the brake caliper.
Tightening torque 45 Nm (33 lbf ft)
|
3. |
Remove the brake pedal clamp and insert the fuse.
|
4. |
Bleed the brake system. See
Bleeding the brake system
.
|
5. |
Fit the front wheel,
Wheels
.
Tightening torque 110 Nm (80 lbf ft) .
|
6. |
Lower the car and depress the brake pedal to press out the brake pistons.
|
7. |
Top up the brake fluid reservoir.
|