Rear anti-roll bar, inner
|
Rear anti-roll bar, inner
|
1.
|
Raise the car and remove one of the rear wheels.
|
2.
|
Remove the bolts (at the ends) securing the inner anti-roll bar.
|
3.
|
Withdraw the anti-roll bar from the rear axle.
|
1.
|
Slide the new anti-roll bar into the rear axle (coat the anti-roll bar thinly with grease to facilitate assembly).
|
2.
|
Fit all the bolts.
Tightening torque: 60 Nm +70° (44 lbf ft +70°)
|
3.
|
Check the position of the rubber bush.
|
4.
|
Fit the wheel. See
Wheels
.
Tightening torque: 110 Nm (81 lbf ft)
|