Soft top cover latch
Soft top cover latch |
Removing |
1. |
Remove the rear side trim. See
Removing
.
|
2. |
Fold the backrest forward.
|
3. |
Mark the control cable position and then loosen the nuts.
|
4. |
Remove the clip securing the cable and move the cable aside.
|
5. |
Remove the bolts securing the microswitch and move it away from the latch.
|
6. |
Mark the longitudinal and vertical position of the latch.
|
7. |
Remove the retaining nuts and remove the latch.
|
Fitting |
1. |
Fit the latch according to markings and tighten the nuts.
|
2. |
Fit the microswitch and tighten the bolts.
|
3. |
Fit the control cable in the previously adjusted position and tighten the nuts.
|
4. |
Fit the cable end on the latch and press on the clip.
|
5. |
Check the locking function. Adjust as necessary. See
Adjusting the soft top cover
.
|
6. |
Refit the side trim. See
Fitting
.
|