Air vent, instrument plate
| Air vent, instrument plate |
| 1. |
Remove the instrument plate, see
Instrument plate
.
|
|
| 2. |
Release the air vent snap fastener and remove the vent.
|
|
| To fit |
| 1. |
Place the new air vent face up on a workbench.
|
|
| 2. |
Remove the transport lock, making sure no loose components fall out of position.
|
|
| 3. |
Press the instrument plate onto the air vent. Make sure all the snap fasteners engage.
|
|
| 4. |
Test the air vent control.
|
|
| 5. |
Fit the instrument plate, see
Instrument plate
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
