Idler wheel, balancer shaft chain circuit

/ 9-3 (9440) / 2004 / 2. Engine / 4-cylinder petrol / Basic engine / Adjustment/replacement / Idler wheel, balancer shaft chain circuit

To remove

1.	Remove the balancer shaft chain

2.	Remove the idler wheel bolts (A).

To fit

1.	Fit the idler wheel bolts (A). Tightening torque 10 Nm (7 lbf ft)

2.	Fit the balancer shaft chain .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.