Rain sensor
Rain sensor |
To remove |
1. |
Remove the cover. Use
82 93 474 Removal tool
.
|
2. |
Unplug the connector.
|
3. |
Release the clamps and remove the rain sensor by pressing the clamps out towards the windscreen.
|
To fit |
1. |
Clean the windscreen in the area of the rain sensor.
|
3. |
Check visually from the outside that good contact (no bubbles) exists between windscreen and sensor.
|
4. |
Plug in the connector.
|
5. |
Fit the cover by first pressing home the bottom edge and then the top edge.
|
Changing the clamps |
1. |
Remove the rain sensor.
|
2. |
Remove the clamps by bending them out until they come free from the rain sensor bracket.
|
3. |
Press new clamps into the grooves on the rain sensor.
|
4. |
Fit the rain sensor.
|