Checking the tightening torque, towbar
Checking the tightening torque, towbar |
Inspection |
Note | ||
Checking applies to both fixed and detachable towbars. |
1. |
Remove the bumper shell, see
Bumper shell, rear, 4D
or
Bumper shell, rear, CV
.
|
2. |
Check the following tightening torques:
|
- |
Bumper member to body (A)
Tightening torque 50 Nm (37 lbf ft) |
- |
Towbar to bumper member (B)
Tightening torque 50 Nm (37 lbf ft) |
- |
Towbar to floor (C)
Tightening torque 50 Nm (37 lbf ft) |
3. |
Fit the bumper shell, see
Bumper shell, rear, 4D
or
Bumper shell, rear, CV
.
|