Engine, overhauling with partial engine
|
Engine, overhauling with partial engine
|
To remove
2.
|
Remove the cooling unit from the front axle member
|
3.
|
Suspend the engine and gearbox from a workshop crane and remove them from the front axle member.
|
4.
|
Undo the gearbox from the engine.
|
5.
|
Fit adapter KM-412-3 on the engine block - remove the relevant components.
|
6.
|
Remove any supplementary engine components.
|
To fit
2.
|
Punch the engine number into the engine block (arrow).
|
3.
|
Knock in the centring sleeves (1) with KM-427 until they stop against the engine block.
|
4.
|
Fit or assemble where applicable all the supplementary engine components.
|
5.
|
Remove the engine from the assembly stand and remove the adapter from the engine block.
|
6.
|
Fit the gearbox onto the engine.
|
7.
|
Fit the engine together with the gearbox onto the front axle member.
|
8.
|
Fit the cooling unit to the front axle member.
|