Oil sump
Oil sump |
To remove |
1. |
Remove
Power train.
|
2. |
Remove
Camshaft covers, removed engine
.
|
3. |
Remove the
Timing cover
.
|
4. |
Remove the oil cooler assembly from the cylinder block. Remove the gasket.
|
5. |
Remove the oil sump. Carefully prise with a pry bar.
|
6. |
Clean sealing surfaces of gasket residue and the like.
|
To fit |
1. |
Apply a 2 mm thick bead of
93 160 951 Flange sealant
on the oil sump's sealing surface and fit a new seal on the oil sump intake pipe.
|
2. |
Fit the oil sump.
Tightening torque, M6 bolts: 10 Nm (7 lbf ft) Tightening torque, M8 bolts, 25 Nm (18 lbf ft). |
3. |
Fit a new gasket and fit the oil cooler to the cylinder block.
Tightening torque 25 Nm (18 lbf ft) |
4. |
Fit
Timing cover
.
|
5. |
Fit
Camshaft covers, removed engine
.
|
6. |
Fit
Power train.
|