Lower radiator hose
Lower radiator hose |
|
Important | ||
Always use wing covers when working in the engine bay. |
||
To remove |
1. |
Undo the expansion tank cap and release the pressure.
|
2. |
Remove the
Spoiler shield, front
.
|
3. |
Place a receptacle under the car, connect a hose and drain the cooling system.
|
4. |
Remove the lower radiator mounting on the left side. Detach the radiator hose from the radiator.
|
5. |
Lower the car.
|
6. |
Remove
Battery
and
Battery cover, bottom section (B284)
.
|
7. |
Detach the turbocharger delivery hose from the turbocharger.
|
8. |
Detach the radiator hose from the thermostat housing pipe.
|
To fit |
1. |
Attach the radiator hose to the thermostat housing pipe.
|
2. |
Attach the turbocharger delivery hose to the turbocharger. Twist the recess on the hose until it aligns with the marking on the turbocharger pipe connection.
|
3. |
Fit the
Battery cover, lower section
and
Battery
.
|
4. |
Raise the car.
|
5. |
Fit the radiator hose with clamp to the radiator.
|
6. |
Fit the lower radiator mounting on the left side.
Tightening torque 47 Nm (35 lbf ft) |
7. |
Fit the
Spoiler shield, front
.
|
8. |
Lower the car.
|
9. |
Pressure test the cooling system, see
Cooling system, pressure testing
.
|
10. |
Top up coolant. See
Bleeding and charging the cooling system (B284)
.
|
11. |
If the battery has been disconnected, see
Procedure after reconnecting the battery
.
|