Radiator
Radiator |
To remove |
|
1. |
Take the cap off the expansion tank to release any pressure.
|
2. |
Remove
Fan cowling, B284
|
3. |
Raise the car.
|
4. |
Remove the spoiler shield.
|
5. |
Place a suitable receptacle under the radiator. Connect a hose to the radiator and drain the coolant.
|
6. |
Lower the car.
|
7. |
Remove the
Front bumper shell
.
|
8. |
Remove the upper cover of the radiator assembly.
|
9. |
Remove the upper radiator hose.
|
10. |
Remove the cover on both sides.
|
11. |
Undo the desiccant container from the radiator.
|
12. |
Detach the engine oil cooler hose from the radiator.
|
13. |
Aut
: detach the automatic gearbox's radiator hose from the radiator using
87 92 806 Removal tool, automatic gearbox fluid pipe
.
|
14. |
Remove the lower coolant hose from the radiator.
|
15. |
Hang up the charge air cooler and condenser using
83 95 212 Strap
to the radiator member stay.
|
16. |
Remove the radiator mountings from the subframe.
|
17. |
Remove the radiator from the charge air cooler and extract the radiator downwards under the car.
|
To fit |
1. |
Fit the radiator from below.
|
2. |
Hook the radiator to the charge air cooler and fasten it.
|
3. |
Fit the mountings to the subframe and the radiator pins.
Tightening torque 47 Nm (35 lbf ft) |
4. |
Remove the strap.
|
5. |
Attach the oil cooler hose.
|
6. |
Fit the desiccant container to the radiator.
|
7. |
Fit the covers.
|
8. |
Fit the lower radiator hose.
|
9. |
Aut
: attach the gearbox radiator hoses.
|
10. |
Fit the upper cover of the radiator assembly.
|
11. |
Fit the upper radiator hose.
|
12. |
Fit
Fan cowling, B284
|
13. |
Fit the
Front bumper shell
.
|
14. |
Raise the car.
|
15. |
Fit the front spoiler shield.
|
16. |
Lower the car.
|
17. |
Pressure test the cooling system; see
Cooling system, pressure testing
.
|
18. |
Top up the coolant. See
Bleeding and charging the cooling system, B284
.
|
19. |
Carry out
Procedures after reconnecting the battery
.
|