Solenoid valve, intake camshaft, rear cylinder bank (695R)
|
|
Solenoid valve, intake camshaft, rear cylinder bank (695R)
|
Warning
|
|
The cooling system is under pressure. Hot coolant and steam can escape.
|
|
- Open the cap slowly to release the pressure.
|
|
- Carelessness can cause eye and burn injuries
|
|
|
|
|
|
|
3.
|
Remove the upper engine cover.
|
|
4.
|
Detach the turbocharger intake hose.
|
Important
|
|
When removing the air cleaner casing cover, be careful not to damage the brake vacuum pump sensor.
|
|
|
|
|
5.
|
Remove the air cleaner casing cover and the air cleaner.
|
|
6.
|
Detach the intake hose and remove the air cleaner casing.
|
|
7.
|
Detach the coolant hose from the engine and move it aside.
|
|
8.
|
Remove the solenoid valve connector.
|
|
9.
|
Remove the solenoid valve.
|
Note
|
|
Be careful not to damage the seal.
|
|
|
1.
|
Fit the solenoid valve.
Tightening torque 10 Nm (7.5 lbf ft)
|
Note
|
|
Be careful not to damage the seal.
|
|
|
2.
|
Attach the connector to the solenoid valve.
|
|
3.
|
Reposition and fit the coolant hose.
|
|
4.
|
Fit the air cleaner casing and intake hose.
|
|
5.
|
Fit the air cleaner and the air cleaner casing cover.
|
|
6.
|
Fit the turbocharger inlet hose.
|
|
7.
|
Replace the upper engine cover.
|
