Flywheel, remove and install, Z18XE

/ 9-3 (9440) / 2006 / 4. Transmission / Clutch system / Adjustment/replacement / Flywheel, remove and install, Z18XE

To remove

1.	Remove the gearbox and the clutch pressure plate - see Gearbox, to remove and to fit and Clutch assembly .

2.	Block the flywheel using KM-652 or 83 94 868 Flywheel locking attachment (1) and remove it from the crankshaft. Cut along the threads in the crankshaft

To fit

1.	Fit the flywheel on the crankshaft with new bolts - tightening torque 35 Nm + 30° + 15°.

2.	Block the flywheel when tightening with KM-652 or 83 94 868 Flywheel locking attachment (2).

3.	Fit the gearbox and the clutch pressure plate, see Gearbox, to remove and to fit and Clutch assembly.

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.