Compressor belt pulley, To remove and To fit, Z18XE
|
Compressor belt pulley, To remove and To fit, Z18XE
|
Important:
The compressor belt pulley and the compressor clutch must be replaced together during a replacement. The service department delivers these parts as a set.
2.
|
Remove the compressor belt pulley:
- Remove the circlip (1)
- Position the removal adapter on the housing - Use MKM-6319-3 (2)
- Pull off the compressor belt pulley - Use MKM-8433 (3) with MK-J-33025 (4)
|
1.
|
Fit the compressor belt pulley:
- Press the compressor belt pulley onto the housing - Use MKM-6319-2 (1)
- Fit the circlip
|