Second bow
| Second bow |
| Removing |
| 1. |
Remove the
Headlining
until the headlining's plastic holder can be taken off the second bow.
|
|
| 2. |
Remove the top cover from the second bow.
|
|
| 3. |
Remove the bow mounting locking lug using two screwdrivers. Knock forward the bow together with the bow mounting away from the soft top mechanism.
|
|
| 4. |
Remove the second bow.
|
|
| Fitting |
| 1. |
Put the second bow in mounting position. Press on the soft top mechanism until the bow mounting locking lugs hook on.
|
|
| 2. |
Remove the soft top support and open the soft top completely.
|
|
| 3. |
Fasten some new double-sided adhesive tape on the second bow. Fold the fabric tabs of the outer roof around the second bow. Observe the centre markings on the parts.
|
|
| 4. |
Operate the soft top half way down and secure it with the soft top support to prevent it falling down when the hydraulic pressure drops.
|
|
| 5. |
Fit the
headlining
.
|
|
This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.
Our Friends
