Coolant pump, Z19DT
Coolant pump, Z19DT |
To remove |
1. |
Remove the timing belt
.
|
2. |
Drain the coolant
.
|
3. |
Remove the camshaft sprocket using
32 025 019 Holding tool, camshaft sprocket
and
83 95 360 Holding tool, crankshaft pulley
.
|
4. |
Remove the camshaft position sensor.
|
5. |
Remove the coolant pump.
|
To fit |
1. |
Clean the threads for the coolant pump and fit a new gasket.
|
2. |
Fit the coolant pump.
Tightening torque 25 Nm (18 lbf ft). |
3. |
Fit the camshaft position sensor. Use
74 96 268 Thread locking adhesive
|
4. |
Fit the camshaft sprocket using
32 025 019 Holding tool, camshaft sprocket
and
83 95 360 Holding tool, crankshaft pulley
.
|
5. |
Fill with coolant
.
|
6. |
Fit the timing belt
.
|