Level sensor, engine oil (243)
Level sensor, engine oil (243) |
To remove |
1. |
Remove the
Oil sump
.
|
2. |
Remove the wind deflector.
|
3. |
Remove the baffle plate.
|
4. |
Remove the circlip and press in the connector.
|
5. |
Remove the level switch from the oil sump.
|
To fit |
1. |
Fit the level switch to the oil sump.
|
2. |
Fit the connector with a new O-ring lightly coated with vaseline. Secure with the circlip.
|
3. |
Fit the baffle plate.
|
4. |
Fit the wind deflector. Fit
Oil sump
.
Tightening torque 10 Nm (7 lbf ft) |