Big-end bearings, change
Big-end bearings, change |
To remove |
1. |
Remove the oil pan - see
Oil pan, removing and fitting
.
|
2. |
Remove the oil intake pipe (1) from the oil pump and the engine block.
|
3. |
Caution
Mark the order of the big-end bearing caps. Remove the big-end bearing cap from the connecting rod. |
4. |
The fracture surfaces of the connecting rods and the big-end bearing caps form an individual fit and must not be interchanged or damaged. Do not rest the connecting rods or big-end bearing caps on their fracture surfaces to avoid damage.
|
5. |
Press out the big-end bearing from the connecting rod and the big-end bearing cap.
|
Big-end journal and big-end bearing cap |
1. |
Fit new big-end bearing shells with engine oil.
|
2. |
Observe the big-end bearing cap order and fitting position - the boss (1) on the big-end bearing caps pointing towards the gearbox end.
|
3. |
Fit the big-end bearing cap onto the connecting rod with new bolts - tightening torque 25 Nm + 30°.
|
4. |
Fit the oil intake pipe together with a new sealing ring on the oil pump - tightening torque 8 Nm
|
5. |
Fit the oil intake pipe onto the engine block - tightening torque 8 Nm.
|
6. |
Fit the oil pan - see
Oil pan, removing and fitting
.
|