Crankshaft position sensor (345), 4WD
Crankshaft position sensor (345), 4WD |
To remove |
1. |
Remove
Transfer gearbox
.
|
2. |
Remove the bracket (A).
|
3. |
Remove the pipe holder bolt (B).
|
4. |
Guide the pipe down slightly and remove the heat shield (C).
|
5. |
Unplug the crankshaft position sensor connector (A).
|
6. |
Remove the sensor (B).
|
To fit |
1. |
Fit the sensor (B) using a new O-ring lightly coated with
acid-free Vaseline
.
Tightening torque 10 Nm (7 lbf ft)
|
2. |
Plug in the crankshaft position sensor connector (A).
|
3. |
Fit the heat shield (C).
|
4. |
Fit the pipe holder bolt (B).
|
5. |
Fit the bracket (A).
|
6. |
Fit
Transfer gearbox
.
|