Front fog light, bezel

/ 9-3 (9440) / 2008 / 3. Electrical System / Lighting and signalling systems / Exterior lighting / Adjustment/replacement / Front fog light, bezel

To remove

1.	Remove the front bumper shell .

2.	Carefully use a screwdriver to bend out the catches (A) from the inside of the shell so that they release from the bumper shell. Continue around the entire bezel until all catches have released.

3.	Remove the bezel.

To fit

1.	Guide the bezel into place and press in all catches (A) until they fasten.

2.	Fit the front bumper shell .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.