SAAB WIS ONLINE

Driver in differential clutch, replacing

Driver in differential clutch, replacing

To remove


1. Remove the Propeller shaft .

2. Remove the driver (A) with a puller.


3. Remove the seal (A) with a screwdriver.



To fit


1. Fit the seal (A) using DT-49065 Fitting drift .


2. Fit the driver (A) using DT-49048 Support .

Tightening torque: 100 ± 5 Nm (73.8± 3.7 lbf ft)


3. Check the oil level as specified in Checking/changing fluid in the differential clutch .

4. Fit the Propeller shaft .