Oil pump pressure control valve

/ 9-3 (9440) / 2010 / 2. Engine / 4-cylinder diesel / Basic engine / Adjustment/replacement / Oil pump pressure control valve

To remove

1.	Remove the oil sump, see Oil sump in car or Oil sump in car Z19DTR .

2.	Place a receptacle under the car to collect the oil.

3.	Remove the bolt.

4.	Remove the spring and piston.

To fit

1.	Clean all parts.

2.	Lubricate the piston with engine oil.

3.	Fit the spring and piston.

4.	Change the sealing ring.

5.	Fit the bolt.

6.	Fit the oil sump, see Oil sump in car or Oil sump in car Z19DTR .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.