SAAB WIS ONLINE

Battery cover, bottom

Battery cover, bottom

To remove


1. Remove the battery .

2. Detach the battery's air inlet pipe and main fuse box:


• Detach the battery's air inlet pipe (A).

• Cars with petrol engine: Press in the catch and move aside the fuse box in front of the battery.

3. Undo the catches (A) and move aside the heat shield, letting any components remain on the heat shield.


4. Remove the bottom of the battery cover:


• Cars with theft protection: Undo the cable tie of the bonnet switch (A) from the battery cover.

• Undo any wiring harness clips (B) from the battery cover.

• Remove the screws (C) and lift out the bottom of the battery cover.


To fit


1. Fit the bottom of the battery cover:


• Position the bottom of the battery cover. Check that the positive cable lies in the cable duct.

• Fit the screws (C) and apply 74 96 268 Thread locking adhesive .

Tightening torque 24 Nm (18 lbf ft)

• Cars with theft protection: Fit the bonnet switch (A) to the battery cover.

• Secure any wiring harness to the battery cover with clips (B).

2. Fit the heat shield.


3. Attach the battery's air inlet pipe and main fuse box:


• Cars with petrol engine: Fit the fuse box (B).

• Attach the battery's air inlet pipe (A).

4. Fit the battery .