Fog light, front, surrounding rim, 9-3X

/ 9-3 (9440) / 2010 / 3. Electrical System / Lighting and signalling systems / Exterior lighting / Adjustment/replacement / Fog light, front, surrounding rim, 9-3X

To remove

1.	Remove Bumper shell, front, 9-3X .

2.	Bend out the locking clips (A) from the inside of the shell by using a chisel so that the clips are released from the bumper shell. Continue around the whole surrounding rim until all clips have been released.

3.	Remove the surrounding rim.

To fit

1.	Guide in the surrounding rim, and push in all the clips (A) until they attach.

2.	Fit Bumper shell, front, 9-3X .

---

---

This project is supported by memberships and donations. If you use this site, please consider Joining SCNA and/or making a donation.